Shure PGXD24SM58 Digital Vocal System W/SM58 Microphone

PGX Digital adds the clarity of 24-bit digital audio to the renowned
PGX line of Shure wireless products. Offering tailored wireless
solutions for vocalists, guitarists, and presenters, PGX Digital combines
the trusted legacy of Shure microphones with state of the art, 24-bit
digital wireless technology that delivers strong, clean RF performance.
The result is wireless audio that sounds like wired, rock-solid RF
signal, and simple setup and operation.

Pure Digital Sound

• 24-bit / 48kHz digital technology for incredibly accurate sound
• 20 Hz – 20 kHz frequency range captures every detail
• Wide selection of rugged Shure Microphones – including the legendary SM58!

Rock-Solid Wireless Reliability

• True digital diversity for rock-solid wireless signal
• 900 MHz operation - free from TV signal interference

Simple Setup and Operation

• Scan and Sync instantly and automatically sets up the system
• One system works anywhere

Wireless System Features
Compatible with Shure microphones trusted by musicians for decades, the
PGXD2 transmits audio with pure digital clarity and rock-solid reliability

PGXD24/SM58
Includes Shure SM58 Handheld Microphone, mic clip, padded carrying case, 2 AA batteries, power supply

Rock On With Shure, The Professionals Choice Worldwide!

he Circus is a dazzling, ever-changing effect light with razor-sharp, flowing beams. Five separate, synchronized pods create amazing effects both in the air and projected onto any surface. The red, green, blue, white and amber LEDs provide a nearly endless combination of colors.

• Dazzling, ever-changing, multi-colored effect light with razor-sharp, flowing beams
  
• Five separate, synchronized pods create astounding effects with or without fog 
  
• User-configurable settings provide programming versatility and enhanced performance  
  
• Contains red, green, blue, white and amber LEDs for maximum color options
  
• Power link up to 12 units which saves time running cables and extension cords
  
• Awesome sound-activated programs dance to the beat of the music
  
• Built-in automated programs via master/slave or DMX

• DMX channels: 3
  
• Coverage angle: 55° 
  
• Light source: 320 (80 red, 80 green, 80 blue, 40 white, 40 amber) LEDs (64 per pod)
  
• Power and current: 120V, 60Hz: 27W, 0.3A operating
  
• Power and current: 230V, 50Hz: 27W, 0.3A operating
  
• AC power: Autoswitching 100V – 240V 50/60Hz
  
• Power linking: max 12 units @ 120V (see manual for details)
  
• Weight: 8.3lbs (3.7kg)
  
• Size: 9.1 x 11.8 x 13in

NS7 CASE

Upstage ordinary mic cables with Performer 500's wide open, natural sound and broad frequency responses.

• Make vocals sound rich and smooth, and with low-noise dielectrics greatly reduces interference and hum
• Heavy-duty Neutral XLR connectors with gold-plated contacts and strain relief ensure a strong, reliable high integrity connection
• 50 FT XLR-XLR Microphone Cable

Hosa Microphone Cables are designed to provide years of dependable service. High-quality components and world-class manufacturing combine to deliver products of exceptional value.

This 1000Ft Spool of microphone cable is ideal for your large audio 

Hosa 25 Foot 20-Gauge XLR To 1/4" TS Premium Tour Grade Microphone Cable

Premium grade microphone cables will meet and exceed the demanding requirements of the touring musician or major sound production studio where accuracy in reproduction is a must! Designed to minimize noise and hum, with a wider frequency response, increased dynamic range and tough, flexible jacket.

Key Features
• Hosa Premium Quality Connectors 
• Tough Black Jacket
• 20 AWG X 2 Conductor 
• Lifetime Unconditional Warranty     

A quality connection starts with quality cable. And with Monster Standard 100, you'll use a cable that sounds as good as it looks. So, whether you're gigging, tracking in the studio or jamming in the garage, Standard 100 is a great entry-level cable to get you started. All the pros know cable makes a difference...that's why a lot of your favorite bands are using Monster. Standard 100 delivers the quality, durability, and reliability every Monster musician needs - It's always ready to perform when you are.

• 20 FT XLR to XLR mic cable
• Heavy-duty, molded connector design increases durability and resists damage
• Twisted pair construction reduces audio bandwidth distortions for better clarity
• 92% coverage copper-braided shield rejects RFI and EMI for a lower noise floor and increased resolution
• Extra-flexible Duraflex outer jacket for superior reliability and cut resistance
• Interchangeable color "O" ring attaches to each XLR connector for easy ID

This Monster Cable features a pair of twisted 3.3 foot cables with female XLR to male XLR connectors. Today's musicians, DJs and recording professionals are using more sophisticated, higher quality gear than ever before and the sound reproduction possible from even modestly priced equipment is incredible. The quality and sound of the cables plays a crucial role in delivering all the performance available. Monster Professional Audio Products are used by the world's top recording artists, engineers and producers. Monster cable products are engineered for better sound and designed with DJs and musicians in mind.

• Affordable twisted pair of XLR to XLR DJ-specific cables
• Balanced audio interconnect cable with high quality copper stranding
• Two conductor construction for improved music reproduction and maximum noise reduction
• 100% foil shield rejects interference
• Dual cable webbing design construction for convenient hookup of left/right channels
• Red and blue color rings on each 24 karat gold-plated connector for easy left/right identification
• Heavy duty molded connector design that increases durability and resists damage
• Length: 3.3 FT/1 meter

Hosa 5 Foot 20-Gauge XLR To XLR Ultra Premium Microphone Cable

Premium grade microphone cables will meet and exceed the demanding requirements of the touring musician or major sound production studio where accuracy in reproduction is a must! Extreme attention to detail went into the design of this premium series microphone cable. A high degree of quality control goes into each and every cable in order to minimize noise, eliminate hum, giving you the highest frequency response and full spectrum dynamic range.

Pick one up today, let your audience hear the difference!

Key Product Features: 

• Hosa Ultra Premium Quality Tour Grade Connectors
• Tough Black Jacket
• 20 AWG X 2 Conductor
• Lifetime Unconditional Warranty           

Hosa 25 Ft XLR to XLR Professional Microphone Cable

Professional grade microphone cables will meet and exceed the demanding requirements of the touring musician or major sound production studio where accuracy in reproduction is a must! Designed to minimize noise and hum, with a wider frequency response, increased dynamic range and tough, flexible PVC jacket.

Key Product Features 

• Hosa Professional Grade Connectors
• Hi-Flex PVC Black Jacket
• 20 AWG X 2 Conductor
• Lifetime Unconditional Warranty

Premium grade microphone cables will meet and exceed the demanding requirements of the touring musician or major sound production studio where accuracy in reproduction is a must! Extreme attention to detail went into the design of this premium series microphone cable. A high degree of quality control goes into each and every cable in order to minimize noise, eliminate hum, giving you the highest frequency response and full spectrum dynamic range.

Pick one up today, let your audience hear the difference!

Key Product Features:

• Hosa Ultra Premium Quality Tour Grade Connectors
• Tough Black Jacket
• 20 AWG X 2 Conductor
• Lifetime Unconditional Warranty

The Servo 300 is a great choice for powering a small to medium sized PA, or an intergrated conference room audio system.

The Servo 300 features large 10-segment 3-color level LED meters and independent channel volume controls. The rear panel includes 1/4-inch balanced and RCA input connectors, as well as 5-way binding post and 1/4-inch speaker outputs.

The Servo amp line also features a 4-stage power protection circuitry that ensures optimal performance and protection of connected components.

• 150 watts per side at 4 ohms
• 300 watts bridged mono at 8 ohms
• 1/4-inch and RCA input connectors
• 5-way binding post and 1/4-inch outputs
• Dual Rack space design
• 10-segment, 3-color Level LED meters
• 4-stage power protection circuitry

• 125 watts of clean power
• Six mic/line inputs on 1/4-inch, XLR and RCA connectors
• Built-in 7-band graphic equalizer
• Three layer priority muting system
• Remote microphone connection on a Euroblock terminal
• Built-in announcement chime with four selectable tones
• M.O.H. (Music On Hold) input and output
• Telephone paging input on a Euroblock terminal
• Phantom power on mic channels 1 and 2 for connecting condenser microphones
• Advanced amplifier protection including current limiting, over current and thermal protection
• Link and preamp terminals allow for expansion to an external mixer or power amplifier
• Advanced electric circuit design with high quality op-amps
• Easily configured for table-top or standard 19-inch rackmount installations
• Expansion bay for adding optional Samson TCM-3 music source module

• Delivers 360 watts of power @ 4 ohms
• Built-in 70/100 volt output transformers with flat frequency response from 70Hz to 18kHz
• Rear panel level control for adjustments from –12 to 0 dB
• Audio specifications: 0.04% THD, dynamic range of 105 dB and crosstalk of 80 dB
• LED signal indicators display power output levels
• Forced air cooling via internal fan
• Protection circuitry with dedicated LEDs
• Input connection made using standard male XLR connector to accommodate balanced signal sources
• Output connections made using Euroblock connectors which accept 12 gauge wire
• Fits into any standard 19-inch rack
• Rugged all-steel chassis with sleek black finish

• Delivers 120 watts of power @ 4 ohms
• Built-in 70/100 volt output transformers with flat frequency response from 70Hz to 18kHz
• Rear panel level control for adjustments from –12 to 0 dB
• Audio specifications: 0.04% THD, dynamic range of 105 dB and crosstalk of 80 dB
• LED signal indicators display power output levels
• Forced air cooling via internal fan
• Protection circuitry with dedicated LEDs
• Input connection made using standard male XLR connector to accommodate balanced signal sources
• Output connections made using Euroblock connectors which accept 12 gauge wire
• Fits into any standard 19-inch rack
• Rugged all-steel chassis with sleek black finish

• Delivers 240 watts of power @ 4 ohms
• Built-in 70/100 volt output transformers with flat frequency response from 70Hz to 18kHz
• Rear panel level control for adjustments from –12 to 0 dB
• Audio specifications: 0.04% THD, dynamic range of 105 dB and crosstalk of 80 dB
• LED signal indicators display power output levels
• Forced air cooling via internal fan
• Protection circuitry with dedicated LEDs
• Input connection made using standard male XLR connector to accommodate balanced signal sources
• Output connections made using Euroblock connectors which accept 12 gauge wire
• Fits into any standard 19-inch rack
• Rugged all-steel chassis with sleek black finish

• Professional High Power, Class H, Rail-switching Amplifier
• 750 Watts per side @ 8 Ohms
• 1100 Watts per side @ 4 Ohms
• Dual Variable-speed Fan Cooling
• Signal, Peak, and Protection Circuit Indicators
• 5-way Binding Post and Speakon™ Speaker Outputs
• XLR and TRS Input Connections
• Dual Rack Space Design

All products by Crown Other Power Amps by Crown

I-Tech HD features a new user-inspired DSP engine co-developed with BSS called OMNIDRIVEHD. The new processing engine features Linear Phase FIR filters that offer unrivaled crossover performance for sonically pure tunings. The OMNIDRIVEHD processing engine also features an innovative new suite of limiters called LevelMAX™. Harman HiQnet™ System Architect ™ mirrors the typical browser navigation interface to provide tour sound and contracting professionals with a familiar interface to access a host of power configuration and control functions.

• Frequency Response: (at 1 watt, 20 Hz - 20 kHz): ±0.25dB.
• Signal to Noise Ratio below rated full-bandwidth power, A-weighted: > 112 dB.
• Total Harmonic Distortion (THD) at full rated power: < 0.1%.
• Intermodulation Distortion (IMD) 60 Hz and 7 kHz at 4:1, from full rated output to –35 dB: < 0.2%.
• Damping Factor (20 Hz to 100 Hz at 8 ohms): > 5000.
• Crosstalk (below rated power, 20 Hz to 1 kHz): > 80 dB.
• Common Mode Rejection (CMR) (20 Hz to 1 kHz): > 70 dB typical.
• Latency (analog, digital inputs): 1.13 mS analog, 1.81 mS digital (96 kHz).
• A/D, D/A Converters: 24-bit 192 kHz Cirrus Logic.
• Digital Input: AES/EBU, 24-bit, 32-96 kHz. Onboard sample-rate converter.
• Network: Onboard TCP/IQ and HiQnet, compatible with standard 100 Mb Ethernet hardware.
• DSP: 24-bit conversion with 32-bit, floating-point DSP processing. World-class IIR and linear phase FIR filters. Has 64 assignable filters with 9 different filter types. Includes all-pass filters, over 2 seconds of delay available per channel, and dual uncorrelated-noise and sine-wave generators.
• Load Impedance: (Note: Safe with all types of loads) Stereo: 1/2/4/8/16 ohms. Bridge Mono: 2/4/8 ohms.
• Input Sensitivity (referenced to 8 ohm rated output): Adjustable in 0.1V steps from 1.4V to 7.75V.
• Required AC Mains: Universal AC input, 100-240VAC, 50/60 Hz (±10%). Maximum AC mains voltage 264VAC.
• AC Line Connector: Five cordsets supplied with amplifier (USA, UK, European, Australia, India).

• Reliable design incorporates many popular features
• Housed in a rugged, all-steel 3U chassis
• Efficient forced-air fans prevent excessive thermal buildup
• Electronically balanced XLR inputs; touchproof binding post and Speakon outputs
• Precision detented level controls, power switch, power LED, and six LEDs which indicate signal, clip and fault for each channel.
• Three-Year, No-Fault, Fully Transferable Warranty completely protects your investment and guarantees its specifications

• Sensitivity (volts RMS) for full rated power at 4 ohms: 1.25 V.
• Frequency Response (at 1 watt) 22 Hz to 20 kHz: +0 dB, 0.8dB
• Signal-to-Noise Ratio (20 Hz to 20 kHz) A-weighted, below rated power: >98 dB. No weighting, below rated power: >93 dB.
• Total Harmonic Distortion (THD): <0.5%.
• Intermodulation Distortion (IMD): (60 Hz and 7 kHz at 4:1) from full rated output to 40 dB: < 0.3%.
• Damping Factor (8 ohm) 10 Hz to 400 Hz: >200.
• Crosstalk (below rated power) at 1 kHz: 76 dB. at 20 kHz: 58 dB.
• Input Impedance (nominal): 20 kilohms balanced, 10 kilohms unbalanced.
• Load Impedance: Rated for 2 to 8 ohms per channel in Stereo, 4 to 8 ohms in Bridge Mono.
• AC Line Voltage and Frequency Configurations Available (10%): 120 VAC 60 Hz, 100 VAC 50/60 Hz, 220 VAC 50 Hz, and 230-240 VAC
• EIA Standard 19"W x 5.25” ( 13.3 cm) H x 15.5” (39.5 cm) D
• Net weight: 62.0 lb (27.7 kg), Ship weight: 74.0 lb (33.6 kg)

• 2 Ohms Stereo (per ch.) 700W
• 4 Ohms Stereo (per ch.) 500W
• 8 Ohms Stereo (per ch.) 275W
• 8 Ohms Bridge-Mono 1000W
• 4 Ohms Bridge-Mono 1400W

There's no debate – when you choose Crown's XTi 2 Series, you're choosing one of the most powerful and innovative amplifiers on the market today. That's because the all-new XTi 2 Series amps continue to set the standard for unmatched performance and value, delivering the goods night after night without breaking a sweat.

• Peakx Plus Limiters provide the ultimate in system performance and protection by allowing full control over threshold, attack, and release
• Enhanced Subharmonic Synth section provides user control over frequency, gain and filter type for system-specific tuning
• 3 User-defined fan mode controls – normal, early and fullspeed – for matching fan performance to a specific application
• New system monitoring provides software visibility of AC line voltage and power supply temperature
• Integrated cast-aluminum handles for easy handling and enhanced durability
• Locking power cord clip provides a secure connection between the amplifier and power cord
• Updated HiQnet Band Manager and System Architect control software
• Increased number of presets to a total of 30; 29 of which are user definable

• Peakx Plus Limiters provide the ultimate in system performance and protection by allowing full control over threshold, attack, and release
• Enhanced Subharmonic Synth section provides user control over frequency, gain and filter type for system-specific tuning
• 3 User-defined fan mode controls – normal, early and fullspeed – for matching fan performance to a specific application
• New system monitoring provides software visibility of AC line voltage and power supply temperature
• Integrated cast-aluminum handles for easy handling and enhanced durability
• Locking power cord clip provides a secure connection between the amplifier and power cord
• Updated HiQnet Band Manager and System Architect control software
• Increased number of presets to a total of 30; 29 of which are user definable

• 2 Ohms Stereo (per ch.) 3000W
• 4 Ohms Stereo (per ch.) 2100W
• 8 Ohms Stereo (per ch.) 1200W
• 8 Ohms Bridge-Mono 4200W
• 4 Ohms Bridge-Mono 6000W

There's no debate – when you choose Crown's XTi 2 Series, you're choosing one of the most powerful and innovative amplifiers on the market today. That's because the all-new XTi 2 Series amps continue to set the standard for unmatched performance and value, delivering the goods night after night without breaking a sweat.

• Peakx Plus Limiters provide the ultimate in system performance and protection by allowing full control over threshold, attack, and release
• Enhanced Subharmonic Synth section provides user control over frequency, gain and filter type for system-specific tuning
• 3 User-defined fan mode controls – normal, early and fullspeed – for matching fan performance to a specific application
• New system monitoring provides software visibility of AC line voltage and power supply temperature
• Integrated cast-aluminum handles for easy handling and enhanced durability
• Locking power cord clip provides a secure connection between the amplifier and power cord
• Updated HiQnet Band Manager and System Architect control software
• Increased number of presets to a total of 30; 29 of which are user definable

• 6 parametric filters per channel with adjustable Q, ±15 dB boost/cut. Also adjustable high and low shelving filters. This 8-filter EQ section can be bypassed.

• Highpass and Lowpass per channel. Butterworth 6/12/18/24 dB per octave. Linkwitz-Riley 24/48 dB per Octave. Also includes ± 15 dB bandpass gain and polarity control.

• 8 parametric filters per channel with adjustable Q, ±15 dB boost/cut. This 8-filter EQ section can be bypassed.

• For signal alignment of driver; 50 mS of total delay.

Takes the low-frequency content of the input signal and "synthesizes" a new signal that is the same as the input signal but one octave lower. The new synthesized signal is then mixed with the original signal to create the effect. New: Users now have control over frequency, gain, and filter type.

• User defeatable limiter that allows users to control Threshold, Attack, and Release times.

• 30 total presets, 29 of which are user-definable.

• 1.4 Vrms

• +0 dB, –1 dB

• 100 dB (A weighted)

• Damping Factor 20 Hz to 1 kHz
• Crosstalk (below rated power)
• 20 kHz - 1 kHz: > 70 db
• Input Impedance (nominal)
• 20k ohms balanced, 10k ohms unbalanced

• +22 dBu typical
• AC Line Voltage and Frequency Configurations
• 100 VAC, 120 VAC, 220-240 VAC 50/60 Hz

• 8.3A; no more than 38W at idle

• 0°C to 40°C at 95% relative humidity (non-condensing)

• Two front-panel rotary level controls, one for each channel
• Power Switch
• On/Off switch applies AC power to the amplifier
• Sel/Prev/Next Buttons
• Three buttons near the LCD screen that are used to access menu items and front panel lockout
• LCD Screen
• Backlit liquid crystal display that shows preset and processing status

• Green LED, one per channel, illuminates when a very low-level signal is present at input (may be used for troubleshooting cable runs).

• Green LED flashes when output signal exceeds -10 dB below clip.

• Green LED flashes when output signal level exceeds -20 dB below clip.

• Green LED, one per channel, illuminates when the amplifier is ready to produce audio.

• Red LED, one per channel, turns on at the threshold of audible distortion

• Red LED, one per channel, illuminates under excessive temperature conditions

• Blue LED illuminates when the amplifier has been turned on and has power

• XLR, one per channel
• Link/Out Connector
• Loop-thru signal from input connector for linking another amplifier, one per channel.

• Two Neutrik Speakon NL4MP output connectors. Channel-1 Speakon is wired with Ch. 1 and Ch. 2 outputs for use with optional single 4-conductor cable. Two binding post outputs (in parallel with Speakon connectors).
• HiQnet USB Connector
• Type B, connects to HiQnet network.

• Steel

• Cast-aluminum

• Proportional speed fan with front-to-rear airflow.

• 19" (W) x 3.5" (H) x 12.25" (D)

• 18.5 lbs (8.4kg)

• 21.5 lbs (9.8kg)

• 2 x 600 Watts into 4 Ohms; 2 x 320 Watts into 8 Ohms
• ATR (Accelerated Transient Response) technology for ultimate punch and clarity
• Ultra-light, ultra-low noise and ultra-efficient switch-mode power supply for noise-free audio, superior transient response and low power consumption
• Switchable limiters offer maximum output level with reliable overload protection
• Detented gain controls for precise setting and matching of sensitivity
• Precise Power, Signal and Limit LEDs to monitor performance
• XLR, 1/4" TRS and RCA input connectors for compatibility with any source
• Professional speaker connectors and "touch-proof" binding posts support most speaker wiring systems
• Built-in Subwoofer/Satellite crossover for more flexibility
• Independent DC and thermal overload protection on each channel automatically protects amplifier and speakers without shutting down the show
• “Back-to-front” ventilation system including air filter for reliable operation
• "Built-like-a-tank", impact-resistant and all-steel 2U rackmount chassis
• Minimum depth chassis (10.1" / 257 mm) and ultra-light weight design (14.8 lbs / 6.7 kg), fits into compact, inexpensive effects racks
• High-quality components and exceptionally rugged construction ensure long life
• Conceived and designed by BEHRINGER Germany

Professional 2,000-Watt Stereo Power Amplifier with ATR (Accelerated Transient Response) Technology.

• 2 x 1,000 Watts into 2 Ohms; 2 x 750 Watts into 4 Ohms; 2,000 Watts into 4 Ohms (bridge mode)
• Precise Power, Signal and Clip LEDs to monitor performance
• XLR and 1/4" TRS input connectors for compatibility with any source
• Professional speaker connectors and touch-proof binding posts support most speaker wiring systems
• Selectable low-frequency filters (30 Hz or 50 Hz) remove distracting infra-sound frequencies
• Independent limiters per channel offer reliable protection against overload and distortion
• High-current toroidal transformer for ultra-high transient response and absolute reliability
• Ultra-reliable Toshiba/Fairchild power transistors
• Independent DC and thermal overload protection on each channel automatically protects amplifier and speakers without shutting down the show
• Back-to-front ventilation system including air filter for reliable operation
• Built-like-a-tank, impact-resistant, all-steel 2U rackmount chassis
• High-quality components and exceptionally rugged construction ensure long life
• Conceived and designed by BEHRINGER Germany

Description:

Professional 4,000-Watt Stereo Power Amplifier with ATR (Accelerated Transient Response) Technology.

• 2 x 2,000 Watts into 2 Ohms; 2 x 1,400 Watts into 4 Ohms; 4,000 Watts into 4 Ohms (bridge mode)
• Precise Power, Signal and Clip LEDs to monitor performance
• XLR and 1/4" TRS input connectors for compatibility with any source
• Professional speaker connectors and touch-proof binding posts support most speaker wiring systems
• Selectable low-frequency filters (30 Hz or 50 Hz) remove distracting infra-sound frequencies
• Independent limiters per channel offer reliable protection against overload and distortion
• High-current toroidal transformer for ultra-high transient response and absolute reliability
• Ultra-reliable Toshiba/Fairchild power transistors
• Independent DC and thermal overload protection on each channel automatically protects amplifier and speakers without shutting down the show
• Back-to-front ventilation system including air filter for reliable operation
• Built-like-a-tank, impact-resistant, all-steel 2U rackmount chassis
• High-quality components and exceptionally rugged construction ensure long life
• Conceived and designed by BEHRINGER Germany

The CX 2-Channel Series is designed to meet the specialized needs of sound contractors. Eight models have been designed from the ground up, combining QSC's exclusive PowerLight® technology with specific features to meet the requirements of fixed installations. With high output power, versatile loading options, high thermal capacity and proven reliability, the CX Series is the ideal solution to any permanently installed sound system.

Advanced monitoring and control when used with a Q-Sys or BASIS system. Learn moreThe model line incorporates QSC's exclusive PowerLight technology. Three models, the CX302V, CX602V and CX1202V, provide direct 70 volt capability ranging from 250 watts to 1000 watts per channel for distributed audio systems. The CX302, CX502, CX702, CX902 and CX1102 offer low impedance capability and range in power from 325 watts to 1100 watts per channel at 4 ohms (20 Hz -20 kHz, 0.05% THD). The versatile CX902 and CX1102 have the ability to drive both 70 volt and low impedance loads for maximum flexibility.

The CX amplifiers are equipped with many contractor specific features including 1 dB detented gain controls for easily repeatable settings and a custom security cover for tamper-proof installations. Active inrush limiting eliminates AC inrush current, cutting the need for power sequencers.

CX amplifiers also include an HD15 Data Port connector to interface with Q-Sys and QSControl networked audio systems, for remote amplifier monitoring and control.

• 8 models to meet your exact power requirements
• Three 70 volt direct models
• Five low impedance models, the CX902 and CX1102 also directly drive 70 volt loads
• Exclusive PowerLight switch-mode power supply technology for high performance and compact size
• Custom integrated security cover for tamper proof installations
• Variable speed fan for low noise
• 1 dB detented gain controls for fast and accurate gain settings
• Active inrush limiting eliminates AC inrush current, removing the need for expensive power sequencers
• XLR and detachable Euro style input connectors
• HD15 DataPort connector for Q-Sys and QSControl computer control and monitoring
• Dip switch control for clip limiters, high pass filters, bridge mono and parallel operation
• Selectable high pass filters protect speakers and prevent speaker transformer saturation withminimal effect on program material (33 Hz or 75 Hz on non-V models, 50 Hz or 75 Hz on V models)
• Comprehensive front panel indicators including signal, clip, protect and QSC's exclusive bridge mono and parallel input LEDs
• Barrier strip output connector
• Comprehensive protection circuitry including DC, infrasonic, thermal overload and short circuit protection
• Class H complementary bipolar output circuitry for high efficiency (CX702, CX902, CX1102 & CX1202V)
• Optional external transformer accessory pack for isolated 70 and 100 -volt outputs (converts CX302 to 400 watts per channel isolated output)
• Compact size - all models are only 2 rack units high and 14" deep for reduced rack cost and floor space
• Light weight - all models weigh only 21 pounds (9.5 kg) for easier racking and shipping
• 3-year warranty plus optional 3-year extended service contract
• All CX Series amplifiers meet the European Union's, 2006 RoHS directive to restrict the use of hazardous materials used in electronic devices.

The GX7 amplifier is ideal for professional entertainers who require maximum performance and portability on a limited budget. The GX7 amplifier delivers just the right amount of power to the most popular speakers used by entertainers. Typically, loudspeaker manufacturers recommend an amplifier with power output equal to the speaker's Program (Music) Power rating or two times (2 x) the Continuous (RMS) Power rating. The GX7's 1000 watts will very capably power many of today's popular subwoofers or two typical 8 ohm speakers per channel.

The GX7 adds the road-proven PowerLight supply to the Class H output section, for more overall output power and additional weight savings. The result is one of the highest power-to-weight ratios in the industry. A low-noise variable-speed fan with rear-to-front airflow keeps amplifiers and racks cool.

GuardRail protection delivers full peak power while preventing detrimental overloads. During excessive clipping, or extreme overheating, GuardRail reduces gain just enough to preserve the integrity of the music, protect the speakers and keep the audience excited, without unprofessional distortion levels or shutdowns.

A subwoofer reduces strain on the full-range speaker, allowing it to play louder, or letting a smaller speaker do the same job. The GX7 supports this mode with a Crossover switch that splits the full-range input entering Ch 1, sending 20 Hz -100 Hz to the sub (Ch 1) and 100 Hz - 20 kHz to the top box (Ch 2). The front panel gain controls balance the sub and top box, while GuardRail optimizes peak power into the sub and top individually, for greater musical impact and dynamic range. GuardRail optimizes peak power into the sub and top individually, for greater musical impact and dynamic range.

The PLX3602 is a premium quality, high-powered amplifier designed for the most demanding live performance uses. Built on the third generation of QSC PowerLight? technology, the PLX3602 combines light weight, superlative audio quality and proven QSC reliability. With strong power ratings, it is capable of providing plenty of clean, undistorted output to the most power hungry speaker systems.

The PLX3602 is the right choice for users who need to drive up to four loudspeakers from each amplifier channel (2 ohm loading), or when extremely high power bridge mono operation is required. It features built-in subwoofer processing, filter switches, and front panel indications of bridge mono status.             

Power Ratings:

• 775 watts at 8ohms
• 1250 watts at 4ohms
• 1800 watts at 2ohms
• 2600 watts at 8ohms in Bridged Mono
• 3600 watts at 4ohms in Bridged Mono

• Very light weight (21 lbs)
• Cooling design exhausts hot air out the front, keeping the rack cool and flow-through heat sinks require no filters that could become clogged
• Front panel LED power, clip, -10 dB, and signal present indicators for system monitoring and troubleshooting and also features bridge and parallel mode LED indicators
• Speakon? NL-4 output connectors provide a positive-locking speaker connection, Ch 1 output uses all 4 wires for single-cable connection to bi-amplified speakers
• Balanced XLR inputs with parallel TRS connectors accommodate all common input connectors and support loop-through operation
• Speakon? NL4 and binding post outputs
• 21-position front-panel gain controls for precise, repeatable amplifier adjustment
• Patented PowerLight power supply technology
• 100 Hz high pass and low pass filters for bi-amping subwoofer and satellite systems without the need for an external crossover
• Switchable/defeatable 33 Hz infrasonic filters protect woofers from over-excursion damage
• Switchable/defeatable clip limiters

Description:

The RMX Series amplifiers give you clean, dynamic power with the legendary QSC sound quality and reliability that pros depend on. QSC's rugged high output design delivers great performance at a new breakthrough price.Don't let the price fool you - these are quality amps that deliver power day after day, night after night, gig after gig. RMX amplifiers deliver true studio-quality sound and pack up to 2400 watts of power in a chassis only 2 rack spaces high and less than 16" deep!

• The RMX Series is packed full of professional features that increase performance and flexibility.
• Independent, user-defeatable clip limiters reduce distortion without sacrificing peak performance
• Selectable low-frequency filters boost system response, protect speakers and ensure low-end tightness by more precisely matching the amplifier's range to the loudspeakers
• Barrier strip, XLR and 1/4" balanced inputs plus Speakon and binding post outputs proide easy connections
• Low-noise ariable speed fans with rear-to-front air flow keep amplifiers and racks cool
• Sizes: 19"w x 3.5"h x 16"d.
• Power requirements: 100, 120, 50-60 Hz
• Wt: 35 lbs.

QSC's RMX 5050 power amplifier represents the state-of-the-art in professional quality performance at an affordable price. Perfectly suited for a wide range of sound reinforcement applications including professional touring, performing musicians and mobile entertainers, the RMX 5050 is optimized to deliver high levels of sustained power, extraordinary audio performance and road-proven reliability. Like its smaller sibling (the RMX 4050HD), the RMX 5050 features a 3-tier, Class H design. The RMX 5050 is extremely efficient at real world power levels. Less AC current is wasted and more goes into producing useful audio power. It'll easily crank out over 1000 watts per side at 8 ohms! The RMX 5050 uses the best available component upgrades to increase peak power by 25% over the RMX 4050HD. Like all RMX amps, the RMX 5050 features balanced 1/4" TRS, XLR and barrier strip inputs, binding posts and Neutrik Speakon outputs, front-mounted gain controls, plus signal and clip LED indicators to monitor performance.

• Extremely high power and tremendous value
• Advanced thermal performance, delivering higher continuous power in 2 ohm stereo or 4 ohm bridged applications
• Stereo: 1050 watts per channel @ 8 ohms; 1600 watts @ 4 ohms
• Bridged Mono: 3200 watts @ 8 ohms; 5000 watts @ 4 ohms
• Dual mono, high current power supply for increased reliability and performance
• Three rack-space chassis is only 16" deep
• Professional quality performance; incorporates road-proven QSC designs
• High-current toroidal transformers for greater 2 ohm power and low noise
• Independent user-defeatable clip limiters reduce distortion
• Selectable low-frequency filters (30Hz or 50Hz) protect speakers and
• increase headroom
• Balanced 1/4" TRS, XLR and barrier strip inputs for maximum flexibility
• Binding post and Neutrik Speakon outputs
• Front mounted gain controls for easy access
• Signal and Clip LED indicators to monitor performance
• Frequency response: 20Hz - 20kHz, 8 ohms, LF filter bypassed, +0/-1dB, 5Hz - 50kHz, 8 ohms, LF filter bypassed, +0/-3dB
• Damping factor: greater than 250 @ 8 ohm
• Noise (unweighted): 100dB below rated output (20Hz - 20kHz, 8 ohm load)
• Input sensitivity: 1.42 Vrms for 1050 watts into 8 ohms
• Input impedance: 20 k ohm balanced, 10 k ohm unbalanced
• Indicators: power-on: green LED; protect: red LED; signal -30dB: yellow LED; clip: red LED
• Requires a 20 amp AC outlet
• 3-year warranty
• Size: 19"w x 5.25"h x 15.9"d. Wt. 75 lbs.

Numark REDWAVE Professional Dj Headphone

Red Wave headphones were designed with the entire DJ experience in mind. Their superior sound, eye-catching looks and comfortable design make Red Wave headphones the clear choice of professional DJs.

Red Wave headphones are designed specifically for the professional DJ. They employ a comfortable, closed–cup design for great isolation from outside noise. Red Wave's large, 50mm neodymium drivers produce clean, powerful output. Designed by DJs for DJs, these headphones have a convenient, swiveling design on one cup so they're easy to wear one-sided between the ear and shoulder. The ear cups also have breathable protein-leather for DJs to remain comfortable during prolonged use.

Red Wave's sleek, modern design ensure they look as good as they sound. Red Wave headphones also come with a gold-plated adapter to quickly plug into MP3 players, and carrying case for quick and convenient transport.

PIONEER HDJ-2000 HEADPHONES COMBINE PERFORMANCE AND MAXIMUM COMFORT

The development of the Pioneer HDJ-2000 stems from numerous requests from top DJs around the world desiring headphones with:

• Exceptional high-quality sound that clearly and accurately reproduces audio
• Comfortable fit to minimize fatigue from long periods of use
• High durability that withstands demanding conditions and touring

Accurate Sound Quality
The headphone is uniquely designed to improve sound quality and reliability—perfect for use in DJ environments and studios.

• Thick 35µm Polyethylene Terephthalate (PET) diaphragm improves rigidity and strength needed for better lower frequency response.
• PET material used in the diaphragm also helps to dampen unwanted resonance.
• Wide frequency response with high clarity and detail results from a large 50mm driver, ideal for all types of music .

Additionally, the headphones have an enclosed “over-ear" design with ear pads that seal around the user’s ears, reducing ambient noise and providing superior sound isolation for tracking in a loud club environment or a studio. The ear pad’s unique material, memory foam (Polyurethane foam), provides a tight yet comfortable seal, further enhancing sound reproduction especially in the mid to high frequency ranges.

Other Features:

• Folding Structure: The headphones fold into a compact configuration for portability and storage.
• Swivel Mechanism: The ear cups turn 90 degrees for more convenient single-ear or on-shoulder monitoring use. A torsion system returns the ear-cup to its normal position after each use.
• Click Mechanism: Ear cups and hinges gently click into place to prevent inadvertent rotation or folding of the headphones during use.
• Mono/Stereo Switch: Combines the audio signal for single-ear monitoring.
• Carrying Bag: A soft pouch is included to protect the headphones when not in use.

PIONEER HDJ-2000 HEADPHONES COMBINE PERFORMANCE AND MAXIMUM COMFORT

The development of the Pioneer HDJ-2000 stems from numerous requests from top DJs around the world desiring headphones with:

• Exceptional high-quality sound that clearly and accurately reproduces audio
• Comfortable fit to minimize fatigue from long periods of use
• High durability that withstands demanding conditions and touring

The Technics RP-DH1200 Headphones are a killer creation from the name you know. Sporting stylistic touches similar to the SL-DZ1200 Digital Turntable, they also offer unprecedented advantages like a removable/replaceable cord and replaceable earpads. You want absolute quality, style and comfort on the street, on the train or at home? Could you use the durability that withstands the abuse a professional DJ dishes out night after night? These Technics phones will fit your needs. Closed-ear designs ensure you hear every note, folding swing-arms allow for one-sided monitoring, the 24k gold plated stereo plugs make flawless contact and every set is made to handle very high volumes.

• Awesome phones with great sound
• Detachable coiled cord for fast and easy replacement
• Large 50mm diameter drivers
• High 3500mW power
• Replaceable earpads
• Swivel mechanism for single-sided monitoring
• Frequency response: 5Hz - 30kHz
• Wt. 4.5 lbs.

Specifications

• Included Software: Serato ITCH
• Input Terminals: Mic x 2 (top XLR / 1/4" Phone, front 1/4" Phone), AUX x 1 (RCA)
• Output Terminals: Master Out x 2 (XLR & RCA), Headphone Monitor Out x 2 (front 1/4" Phone, Mini-pin)
• Other Terminals: USB-B Connector x 1
• Frequency Range: 20Hz to 20kHz
• Total Harmonic Distortion: 0.01 % or less
• Included AC Adaptor: 120V (60 Hz), rated output 5V DC
• External Dimensions: 26.8in (W) x 12.5in (D) x 3.7in (H)
• Weight: 11 lbs
• Compatible OS: Mac OS X (10.4.11, 10.5.11, 10.6 or later), Windows 7 Home Premium/Professional/Ultimate, Windows Vista Home Basic/Home Premium/Ultimate/Business (SP1 and later), Windows XP Home Edition/Professional (SP3 and later). (Note: Not compatible with Windows XP Professional x64 edition)

• Awesome phones with great sound
• Detachable coiled cord for fast and easy replacement
• Large 50mm diameter drivers
• High 3500mW power
• Replaceable earpads
• Swivel mechanism for single-sided monitoring
• Frequency response: 5Hz - 30kHz
• Wt. 4.5 lbs.

Denon DJ, a leading manufacturer of premium-grade DJ equipment, introduces the DN-MC6000 Mixer and MIDI Controller, a four-channel/eight-source standalone digital DJ mixer with MIDI interface and internal sound card. With an astounding amount of features, real-time channel matrix operation, slim tabletop design, state-of-the-art solid steel chassis construction and quality sound, the DN-MC6000 is one of Denon DJ’s flagship controllers. Also acting as an audio interface (with a 2 in/2out stereo soundcard included), the DN-MC6000, when paired with the user’s software of choice, is a turnkey control solution for mobile DJs and party DJs, and a clear centerpiece to any DJ rig.

It comes bundled with Virtual DJ LE, Audio/Video/Karaoke mixing software in North/South America and Canada, and Native Instruments TRAKTOR LE for Europe and Asia. The DN-MC6000 is MIDI-mapable and compatible with other popular DJ programs. The unit interfaces seamlessly with Mac OSX and Windows XP, Vista and Windows 7 operating systems. Unlike other comparable products, the DN-MC6000 includes a selectable Video/Audio control cross fader feature. Each side of the unit can control up to two decks (for a total of four), with visible deck color change for intuitive, straightforward operation. Also notable is the fact that the DN-MC6000 is a real mixer, able to process audio inputs for external devices without a connection to a computer, as a dedicated mixer unit would.

Inputs include two RCA/Phono lines, one XLR Mic/quarter-inch one quarter-inch TRS Mic jack, and two RCA AUX inputs. Outputs include balanced master XLR, unbalanced master RCA, quarter-inch TRS booth/send out, RCA record out, and stereo headphone out. The DN-MC6000 also has a USB Audio in/out selectable routing switch and a Kensington lock security feature. The unit measures 18.1 x 2 x 10 inches without rack ears. Power input is AC 100V – 240V, 50/60 Hz, and output is DC 12V, 3A. AC adaptor power supply and 1.5-meter USB cable are included, and the unit also features a green, energy-saving ECO standby mode.

Key features include rack-mountability (with included 19 in. rackmount accessory kit), a number of on-board MIDI effect controls, durable construction, intuitive layout, dual jog wheels, pitch fader, channel fader, cross fader and much more. The unit’s Pitch/Fader/Volume lock function holds the last known Audio value and position until the NULL point is again reached. It is also easy for users to find where they are going, with the included File browse navigation keys and rotary encoder file selector knob with illuminated ring. Also featured are the unit’s high-quality, high-output headphone amp, the independent 3-band Channel EQ with “Kills” (high-mid-low) and various Utility presets to customize user settings.

• New, 3-way powerful audio/video-assignable cross fader (Audio, Audio/Video, Video)
• Newly designed, high-resolution 105-mm touch-sensitive jog wheel
• Smooth 100-mm long pitch slider with high 14-bit resolution
• Eight (4 + 4) hot cue/sampler buttons with dual bank selector key
• Auto loop button with Beat Jump (loop cut)
• Manual loop In/Out buttons
• Large-size Cue & PLAY buttons
• EFX controls, EFX keys and Parameter knobs
• Multiple GUI controls – Mixer, Video, Scratch, Sampler, REC, etc.
• Powerful Shift key – used for various dual-button operations
• Search keys, to advance around within a file
• Denon’s legacy “Pitch Bend” keys
• Vinyl and Pitch Bend Jog modes
• SYNC key for beat matching between decks
• Key Lock on/off button with LED confirmation
• Matrix Input Assignment selector knob
• Selectable PFL input gain and program meters
• Independent CUE system (all channels)
• Split Cue function with Cue/Master pan knob
• 45-mm Channel and Cross Faders
• Independent Channel A-B Thru switch (cross fader)
• Cross Fader contour adjustment
• Master Output stereo/mono switch
• Booth Output with Source Selector and level control
• Mic 3-band EQ (High-Mid-Low) for mics 1 and 2
• Mic Ducking and built-in Echo Effect for mics 1 and 2
• MIDI-mapable control surface (faders, knobs and buttons) for other DJ applications

The Obey™ 8 is a compact 32-channel DMX controller that is ideal for LED fixtures. It can control up to four, eight-channel fixtures and store eight sets of chases containing up to 99 steps each. Additional features include the ability to stack/layer scenes, a speed/fade slider that allows fading between scenes at user discretion and adjustable blackout. The Obey™ 8 also features flash buttons that provide 100 percent output when buttons are held.

• Universal DMX-512 compact controller ideal for LED fixtures
  
• Controls up to 4 intelligent lights of up to 8 channels each
  
• 32 DMX channels of control
  
• 8 sets of chases containing up to 99 steps each (200 steps max)
  
• Playback options include automatic, sound-activated or manual
  
• 4 fader flash buttons for momentary on
  
• Adjustable blackout allows fixtures to fade out
  
• Adjustable audio sensitivity
  
• Includes 2 extension plates for rack mounting
  
• Sequential linking of chases
  
• Grab any fixture on the fly
  
• DMX polarity selector

• Compact DMX-512 controller for LED fixtures (3-channel mode only)
  
•      Channel 1: red
  
•      Channel 2: green
  
•      Channel 3: blue
  
• Playback options include automated, sound-activated or manual RGB
  
• Playback modes:
  
•      Preset: 9 built-in colors 
  
•      Chase: triggers automated programs 
  
•      Macro: scrolls through the color spectrum 
  
• Variable fade times for all playback modes
  
• Variable strobing on the fly (2Hz – 33Hz)
  
• Fader for master dimmer
  
• Adjustable blackout allows fixtures to fade out
  
• Adjustable audio sensitivity

Bigger shows call for more accessibility and ease of programming. The Obey™ 70 bridges the gap between smaller rack mount controllers and massive control desks. 14 reversible faders and an assignable joystick allow for easy programming of up to 12, 32 channel fixtures. The Obey™ 70 can store up to 6 sets of chases containing 240 scenes on 384 total channels of control. Also at your fingertips are fog and strobe control as well as MIDI compatibility.


Key Features:

• Universal DMX-512 controller 
  
• Controls up to 12 intelligent lights of up to 32 channels each 
  
• 30 banks of 8 scenes, 240 scenes max 
  
• 384 DMX channels of control 
  
• 6 sets of chases containing 240 scenes 
  
• Program fade and speed time into each step 
  
• Reversible sliders 
  
• Re-assignable channels 
  
• Sequential linking of chases 
  
• Assignable pressure-sensitive joystick 
  
• Fog & strobe control buttons 
  
• Grab any fixture on the fly 
  
• Beat activation, tap-sync and auto run 
  
• DMX polarity selector 
  
• 4-space (4U) rack mount 
  
• MIDI compatible

The Obey™ 40 is the next step up from the Obey™ 10, allowing for control of up to 12 fixtures at 16 channels each. With a slightly larger size comes a larger capacity: the Obey™ 40 has 30 banks on 8 scenes, or up to 240 scenes. The Obey™ 40 offers the flexibility of its little brother but also adds fog and strobe control and MIDI compatibility.

Key Features:

• Universal DMX-512 controller 
  
• Controls up to 12 intelligent lights of up to 16 channels each 
  
• 30 banks of 8 scenes, 240 scenes max 
  
• 192 DMX channels of control 
  
• 6 sets of chases containing 240 scenes 
  
• Program fade and speed time into each step 
  
• Reversible sliders 
  
• Re-assignable channels 
  
• Sequential linking of chases 
  
• Fog & strobe control buttons 
  
• Grab any fixture on the fly 
  
• Beat activation, tap-sync and auto run 
  
• Polarity selector 
  
• 3-space (3U) rack mount 
  
• MIDI compatible

Obey™ 10 is a compact controller ready to handle all the complexities of today's lighting fixtures. Capable of controlling up to 8, 16-channel fixtures, the Obey™ 10 can store 6 sets of chases containing up to 999 scenes each. Flexibility was key in the design of the unit so CHAUVET® included the ability to reverse sliders and re-assign channels as needed. Also offered is the ability to grab any fixture on the fly, and set up your fixture's movements to be beat activated or run automatically without input from the operator. 


Key Features:

• Universal DMX-512 controller 
  
• Controls up to 8 intelligent lights of up to 16 channels each 
  
• 128 DMX channels of control 
  
• 6 sets of chases containing 999 scenes each 
  
• Program fade and speed time into each step 
  
• Reversible sliders 
  
• Re-assignable channels 
  
• Sequential linking of chases 
  
• Grab any fixture on the fly 
  
• Beat activation and auto run 
  
• DMX polarity selector 
  
• 2-space (2U) rack mount

Chauvet Hurricane 1100 (Chauvet H 1100)

The Hurricane Series Foggers provide the quality, performance and innovation for which CHAUVET is known. All come with generous-capacity tanks and quick heat up of water-based fog to fill a venue within minutes.

Output: 8,000cfm
1.3L tank capacity
5 minute heat up
Manual fog button
Low fluid indicator and auto shut down
LED-illuminated tank
Wired remote included
Water-based fogger

OPTIONS
Wired timer remote (FC-T)

Fluid consumption: 47ml/minute
Power and current: 120V, 60Hz: 774W, 5.9A operating, 6.5A inrush, PF 0.99
AC power: Autoswitching 115V/60Hz or 230V/50Hz
Weight: 8.4lbs (3.8kg)
Size: 9.7in x 7.1in x 6.6in
246mm x 180mm x 168mm

The Hurricane™ Series Foggers provide the quality, performance and innovation for which CHAUVET® is known. All come with generous-capacity tanks and quick heat up of water-based fog to fill a venue within minutes.

Features:

• Output: 4,000cfm
• 1.3L tank capacity
• 5 minute heat up
• Manual fog button
• Wired remote included
• LED-illuminated tank
• Water-based fogger
  
  

  OPTIONS

• Wired timer remote (FC-T)
• Wireless remote (FC-W)

• 4 multi-input stereo channels
• Switchable phono or line input stages, RIAA phono preamps on 3 chs
• Soundcard output routing switches for each channel
• 3-band total kill EQ - +6dB to off
• 3-band total kill EQ - +6dB to off
• 2 FX sends with pre/post selection
• 2 analogue VCF filters
• 2 stereo returns
• Assignable LFO and editable fader step-filter function
• Headphone monitor with mix/cue control, 3.5mm and 1/4" sockets
• Mic input on XLR with level control and 2-band EQ,
• Mic input on XLR with level control and 2-band EQ, routable straight to soundcard
• High performance internal switch-mode PSU
• New BPM detection circuit

• 20 channel 96 kHz / 24-bit USB 2.0 (480Mbit/s)
• Drivers available for PC and Mac
• 10 in/10 out (4 st in + optl in/4 st out + optl out)
• Soundcard inputs fed from Mic, FX2, FX1, main mix or st ch 1-4
• Soundcard outputs
• Soundcard outputs
• FX2 RCA record output

• Dedicated MIDI controls (shift function doubles messages available): 8 x 60mm linear faders, 16 detented rotary pots, 10 rotary encoders, 50 switches, 2 custom jog wheels with 4 micro switches, 8 illuminated push switches
• Selected mixer controls send MIDI messages

• Size: 17"w x 3.5"h x 14"d (432 mm x 88 mm x 358 mm)
• Weight: 11 lbs. (5 kg)

Pioneer Electronics (USA) Inc. Professional Sound and Visual Division redefines the DJ experience today with the announcement of its new CDJ-850 digital media player, inspired by Pioneer’s cutting-edge professional CDJ series for the next generation of DJ entertainers. The CDJ-850 player adopts many of the technical advances made in the industry standard, pro-series versions and invites all levels of DJs to create, perform and share mixes like a professional.

Pioneer is dedicated to bringing DJs the best audio/video and live performance products. For newer DJs looking to elevate and greatly enhance their performance and creativity, Pioneer’s CDJ-850 delivers enhanced mixing features, excellent audio quality and a new platform for them to share their music.

“With the increasing popularity of the DJ art form and culture, we understand the importance of creating products for all levels of DJ skill sets. Our aim with the new CDJ-850 is to ensure that DJs get to enjoy similar innovative features and design to those found in our flagship CDJ-2000 and CDJ-900 players, and get to experience the best product for their needs,” said David Arevalo, senior marketing manager, Professional Sound and Visual division for Pioneer Electronics (USA) Inc.

• Pro-series Design & Exacting Features – Inheriting the club standard layout and precise control features of its professional CDJ series, the CDJ-850 integrates a large 206mm jog dial for continuous free and easy control along with a rotary selector and browse buttons integrated within the display.
• Compatible Media and Formats – Users can mix a variety of music formats and media, as the CDJ-850 is compatible with MP3, AAC, WAV and AIFF digital audio formats recorded on USB storage devices or CD-R/RW discs.
• Included rekordbox™ Software – Pioneer’s new exclusive DJ music management software makes it easy for home DJs to effortlessly organize their entire music library as it analyzes files (settings, creating playlists, saving histories) to their custom specifications. As used by professionals to optimize DJ play, the software enables users to:
• 1. Analyze data such as the Wave, Beat Grid, BPM, and ID3 Tag1 of music files
• 2. Create cues2 and loops settings
• 3. Create and edits playlists
• 4. Save history of music files played on the CDJ-850
• USB Export Capability – DJs using the rekordbox software can easily export their music files and custom managed data onto a USB device and quickly plug in directly to the CDJ-850 and access tracks without the need to be linked to a PC. Play histories on the CDJ-850 are automatically recorded onto rekordbox via connected USB device for the DJ’s next session which makes the cycle of music file management, DJ play and preparation for future sessions very simple.
• User Interface – The display and user interface of the player is designed for quick and fluid music selection. Combined with its rotary selector, navigation through music lists (title, artist, BPM, etc.) is extremely fast and easy. The WAVE display enables smooth DJ play because the user can visually analyze the flow and dynamics of the entire song.
• DJ Software Control and Audio Interface – The CDJ-850 multi-media player features MIDI, enabling control of various DJ softwares running on a laptop. With the use of the built-in USB HID interface, the CDJ-850 can also control more complex operations of DJ software without the need for a control disc. For additional versatility, the player can also be used as a PC audio interface.
• Tag List Function – Equipped with an editable Tag List functionality, users of the player can easily register tracks during play or preview to add to their playlist queue. The song order in the Tag List can be altered and saved as a playlist in rekordbox.

The Behringer HPX4000 DJ Headphones are perfect for the DJ booth or mixing at home. They display impressive sound separation they?re incredibly comfortable to wear. You?ll dig the high-definition bass and super-transparent highs with an ultra-high dynamic range. High-quality components, with high-efficiency cobalt capsules and a single-sided cord with oxygen-free copper wires as well as round swiveling ear cups.

• Innovative DJ phones
• High-definition bass and super-transparent highs
• Ultra-high dynamic range
• High-efficiency cobalt capsule
• Single-sided coiled cord with oxygen-free copper wires
• Round swivelling ear cups
• Ultra-rugged headband construction
• 40mm capsule
• Frequency response: 20Hz - 20kHz
• Max. power handling: 100 mW
• Impedance: 32 ohm
• Sensitivity: 113.5 dB @ 1 kHz
• Cord length: 1 m (extendable to 2.5 m)
• Connector: 1/8" TRS stereo connector plus "? TRS adapter

Padded, protective cover for PRX718S. Gray cover with white JBL® Logo.

•The ultimate protection for your PRX718S loudspeaker 
•Durable 600-D Nylon outer fabric - keeps out dust and dirt 
•Interior padded with protective foam layer helps prevent dents & dings 
•Handle cut-outs provide access to built-in cabinet handles
•Printed JBL logo on front panel to compliment your JBL PRXs 
•Grey exterior
•The official protective cover for JBL PRX loudspeakers

VRX915M-CVR-CXD Deluxe padded protective cover for VRX915M

•The ultimate convertible cover for the VRX915M monitor.
•A new, patent pending convertible design allows full functionality of speaker while inside protective cover.
•Cover constructed of 1200D Nylon with waterproof backing and 10mm padding for complete protection.
•Roll-away front access cover reveals a mesh panel over the loudspeaker grille.
•Handle access covers with Velcro closure allows for superior functionality and protection.
•Embroidered JBL Logo.
•Black Exterior.

VRX915M-CVR-CXD  
Deluxe padded protective cover for VRX915M

•The ultimate convertible cover for the VRX915M monitor.
•A new, patent pending convertible design allows full functionality of speaker while inside protective cover.
•Cover constructed of 1200D Nylon with waterproof backing and 10mm padding for complete protection.
•Roll-away front access cover reveals a mesh panel over the loudspeaker grille.
•Handle access covers with Velcro closure allows for superior functionality and protection.
•Embroidered JBL Logo.
•Black Exterior.

VRX915M-CVR-CXD Deluxe padded protective cover for VRX915M

•The ultimate convertible cover for the VRX915M monitor.
•A new, patent pending convertible design allows full functionality of speaker while inside protective cover.
•Cover constructed of 1200D Nylon with waterproof backing and 10mm padding for complete protection.
•Roll-away front access cover reveals a mesh panel over the loudspeaker grille.
•Handle access covers with Velcro closure allows for superior functionality and protection.
•Embroidered JBL Logo.
•Black Exterior.

The JBL Sub Transporter is a patented system that slips over the sub, fully encloses the cabinet for protection, and rolls on an integrated casterboard. Includes 4" casters. Embroidered JBL Logo. Fits EON518S, JRX118S, and PRX518S.

•Offers superior protection and easy transportation with heavy-duty construction and a built-in casterboard
•Integrated casterboard lets you roll in and out of gigs quickly & efficiently - makes set up & tear-down easier than ever
•Bag constructed of nylon with water-resistant backing, thick protective padding and soft tricot interior
•Durable "double access" #10 nylon coil zippers
•Heavy-duty reinforced carry handles with polyethylene core
•Embroidered JBL logo to compliment your EONs
•Black Exterior
•The official transport case for JBL EON loudspeakers

Padded, protective cover for SRX738S. Black cover with embroidered orange JBL® Logo.

•Deluxe padded protective cover for SRX738S
•The ultimate protection for your SRX738S loudspeaker
•Durable 600-D Nylon outer fabric keeps out dust & dirt, while extra padding helps prevent dents & dings
•Interior padded with protective foam layer and soft tricot lining
•Handle cut-outs provide access to built-in cabinet handles
•Embroidered JBL logo on front panel to compliment your JBL SRXs
•Black Exterior
•The official protective cover for JBL SRX loudspeakers

Padded, protective cover for SRX728S. Black cover with embroidered orange JBL® Logo.

•The ultimate protection for your SRX728S loudspeaker
•Durable 600-D Nylon outer fabric keeps out dust & dirt, while extra padding helps prevent dents & dings
•Interior padded with protective foam layer and soft tricot lining
•Handle cut-outs provide access to built-in cabinet handles
•Embroidered JBL logo on front panel to compliment your JBL SRXs
•Black Exterior
•The official protective cover for JBL SRX loudspeakers

Padded, protective cover for SRX725. Black cover with embroidered orange JBL® Logo.

•The ultimate protection for your SRX725 loudspeaker
•Durable 600-D Nylon outer fabric keeps out dust & dirt, while extra padding helps prevent dents & dings
•Interior padded with protective foam layer and soft tricot lining
•Handle cut-outs provide access to built-in cabinet handles
•Embroidered JBL logo on front panel to compliment your JBL SRXs
•Black Exterior
•The official protective cover for JBL SRX loudspeakers

Padded, protective cover for SRX722. Black cover with embroidered orange JBL® Logo.

•The ultimate protection for your SRX722 loudspeaker
•Durable 600-D Nylon outer fabric keeps out dust & dirt, while extra padding helps prevent dents & dings
•Interior padded with protective foam layer and soft tricot lining
•Handle cut-outs provide access to built-in cabinet handles
•Embroidered JBL logo on front panel to compliment your JBL SRXs
•Black Exterior
•The official protective cover for JBL SRX loudspeakers

Padded, protective cover for SRX718S. Black cover with embroidered orange JBL® Logo.

•Designed to work with JBL WK-4 Caster Kit
•The ultimate protection for your SRX718S loudspeaker
•Durable 600-D Nylon outer fabric keeps out dust & dirt, while extra padding helps prevent dents & dings
•Interior padded with protective foam layer and soft tricot lining
•Handle cut-outs provide access to built-in cabinet handles
•Embroidered JBL logo on front panel to compliment your JBL SRXs
•Black Exterior
•The official protective cover for JBL SRX loudspeakers

Padded, protective cover for SRX715. Black cover with embroidered orange JBL® Logo.

•The ultimate protection for your SRX715 loudspeaker
•Durable 600-D Nylon outer fabric keeps out dust & dirt, while extra padding helps prevent dents & dings
•Interior padded with protective foam layer and soft tricot lining
•Handle cut-outs provide access to built-in cabinet handles
•Embroidered JBL logo on front panel to compliment your JBL SRXs
•Black Exterior
•The official protective cover for JBL SRX loudspeakers

Padded, protective cover for SRX712M. Black cover with embroidered orange JBL® Logo.

•The ultimate protection for your SRX712M loudspeaker
•Durable 600-D Nylon outer fabric keeps out dust & dirt, while extra padding helps prevent dents & dings
•Interior padded with protective foam layer and soft tricot lining
•Handle cut-outs provide access to built-in cabinet handles
•Embroidered JBL logo on front panel to compliment your JBL SRXs
•Black Exterior
•The official protective cover for JBL SRX loudspeakers

Padded, protective cover for PRX535. Gray cover with white JBL® Logo.

•The ultimate protection for your PRX535 loudspeaker
•Durable 600-D Nylon outer fabric keeps out dust & dirt, while extra padding helps prevent dents & dings
•Interior padded with protective foam layer and soft tricot lining
•Handle cut-outs provide access to built-in cabinet handles
•Printed JBL logo on front panel to compliment your JBL PRXs
•Grey exterior
•The official protective cover for JBL PRX loudspeakers

Padded, protective cover for PRX525. Gray cover with white JBL® Logo.

•The ultimate protection for your PRX525 loudspeaker
•Durable 600-D Nylon outer fabric keeps out dust & dirt, while extra padding helps prevent dents & dings
•Interior padded with protective foam layer and soft tricot lining
•Handle cut-outs provide access to built-in cabinet handles
•Printed JBL logo on front panel to compliment your JBL PRXs
•Grey exterior
•The official protective cover for JBL PRX loudspeakers

Padded, protective cover for PRX518S. Gray cover with white JBL® Logo.

•The ultimate protection for your PRX5518S loudspeaker
•Durable 600-D Nylon outer fabric keeps out dust & dirt, while extra padding helps prevent dents & dings
•Interior padded with protective foam layer and soft tricot lining
•Handle cut-outs provide access to built-in cabinet handles
•Printed JBL logo on front panel to compliment your JBL PRXs
•Grey exterior
•The official protective cover for JBL PRX loudspeakers

•The ultimate protection for your PRX515 loudspeaker
•Durable 600-D Nylon outer fabric keeps out dust & dirt, while extra padding helps prevent dents & dings
•Interior padded with protective foam layer and soft tricot lining
•Handle cut-outs provide access to built-in cabinet handles
•Printed JBL logo on front panel to compliment your JBL PRXs
•Grey exterior
•The official protective cover for JBL PRX loudspeakers

Padded, protective cover for PRX512M. Gray cover with white JBL® Logo.

•The ultimate protection for your PRX512M loudspeaker
•Durable 600-D Nylon outer fabric keeps out dust & dirt, while extra padding helps prevent dents & dings
•Interior padded with protective foam layer and soft tricot lining
•Handle cut-outs provide access to built-in cabinet handles
•Printed JBL logo on front panel to compliment your JBL PRXs
•Grey exterior
•The official protective cover for JBL PRX loudspeakers

Deluxe padded cover for MRX528S. 600D Nylon (Black), 5mm padding, handle access openings.

•The ultimate protection for your MRX528 loudspeaker
•Durable 600-D Nylon outer fabric - keeps out dust, dirt, and helps prevent dents & dings
•Interior padded with protective foam layer and soft tricot lining
•Handle cut-outs provide access to built-in cabinet handles
•Printed JBL logo on front panel to compliment your JBL PRXs
•Black exterior
•The official protective cover for JBL MRX loudspeakers

• The ultimate protection for your MRX525 loudspeaker
• Durable 600-D Nylon outer fabric - keeps out dust, dirt, and helps prevent dents & dings
• Interior padded with protective foam layer and soft tricot lining
• Handle cut-outs provide access to built-in cabinet handles
• Printed JBL logo on front panel to compliment your JBL PRXs
• Black exterior
• The official protective cover for JBL MRX loudspeakers

Deluxe padded cover for MRX518S. 600D Nylon (Black), 5mm padding, handle access openings.

•The ultimate protection for your MRX518S loudspeaker
•Durable 600-D Nylon outer fabric - keeps out dust, dirt, and helps prevent dents & dings
•Interior padded with protective foam layer and soft tricot lining
•Handle cut-outs provide access to built-in cabinet handles
•Printed JBL logo on front panel to compliment your JBL PRXs
•Black exterior
•The official protective cover for JBL MRX loudspeakers

Deluxe padded cover for MRX515. 600D Nylon (Black), 5mm padding, handle access openings.

•The ultimate protection for your MRX515 loudspeaker
•Durable 600-D Nylon outer fabric - keeps out dust, dirt, and helps prevent dents & dings
•Interior padded with protective foam layer and soft tricot lining
•Handle cut-outs provide access to built-in cabinet handles
•Printed JBL logo on front panel to compliment your JBL PRXs
•Black exterior
•The official protective cover for JBL MRX loudspeakers

Deluxe padded cover for MRX512M. 600D Nylon (Black), 5mm padding, handle access openings.

•The ultimate protection for your MRX512M loudspeaker
•Durable 600-D Nylon outer fabric - keeps out dust, dirt, and helps prevent dents & dings
•Interior padded with protective foam layer and soft tricot lining
•Handle cut-outs provide access to built-in cabinet handles
•Printed JBL logo on front panel to compliment your JBL PRXs
•Black exterior
•The official protective cover for JBL MRX loudspeakers