http://www.djseller.com/ en Copyright (c) 2012 Paul Zar (Manager) info@djseller.com (Paul Zar (Manager)) info@djseller.com (Paul Zar (Manager)) Tue, 24 Apr 2012 19:12:10 -0400 Zen-Cart v. v 2.1.4 14.02.2008 15:26 RSS 2.0 Feed 1440 http://www.djseller.com/dj-equalizers/ashly/ashly-gqx-1502 http://www.djseller.com/product_reviews/ashly-gqx-1502

Description The graphic equalizer shall be stereo (2-channels). Each channel shall consist of 15 bands centered on standard ISO frequencies at intervals of 2/3 octave and covering a frequency range of 25Hz to 16kHz. Individual bands shall be activated by linear slide faders with a 45mm travel, metal actuator shafts and a tactile center detent. The range of equalization per band shall be ±15dB. The equalizer shall have a gain of unity with all sliders centered, and shall have a maximum in/out level of +22dBu. Frequency response shall be ±.25dB 10Hz to20kHz. Hum and noise shall be at least - 96dBu and SMPTE intermodulation distortion or THD shall be less than .01% at full output. Input impedance shall be 20k ohm balanced, 10k ohm unbalanced. Output impedance shall be 200 ohm. Inputs and outputs shall be active (transformerless) balanced type on XLR ,1/4" phone jacks and barrier strip terminals. Individual filters shall be Wein-bridge type and connected in a summing circuit optimized for minimum filter interaction and constant bandwidth at any slider setting. Boost and cut characteristics shall be fully symmetrical, with the filter being electrically removed from the circuit in the center (flat) position. Individual filters shall be accurate to within 3% of indicated center frequency and shall be non-adjustable to insure long term accuracy. The equalizer shall also include a 12dB per octave high pass filter at 40Hz, equipped with a bypass switch. An LED indicator shall show overload conditions. Input gain shall be adjustable over a range of ±15dB, and an overall EQ bypass switch shall be included. The equalizer shall weigh 9.5 lbs net and mount in a standard 19" rack using 2 spaces (3.5" high). The power requirement shall be 110-115VAC, 50-60Hz, 12W. The unit shall be an Ashly Audio GQX-1502. Features: Constant "Q" Design with Low Ripple and Accurate Response Near the "Flat" Setting Precision Wein-bridge Filters for Accurate Response and Low Distortion Switchable High Pass Filter High Quality Detented Metal-Shaft Fader Frequency Sliders Feature Center Detent “Off” Balanced XLR, 1/4", and Barrier Strip Inputs Servo-Balanced XLR, 1/4", and Barrier Strip Outputs: 5-Year Worry-Free Warranty UL Listed Rider Friendly

]]> info@djseller.com (Paul Zar (Manager)) http://www.djseller.com/dj-equalizers/ashly/ashly-gqx-1502 Fri, 26 Mar 2010 00:30:13 -0400 320.00 USD 405 10 Ashly 50 GQS-1502 http://www.djseller.com/images/gqx1502-f.jpg http://www.djseller.com/dj-equalizers/ashly/ashly-gqx-3102 http://www.djseller.com/product_reviews/ashly-gqx-3102

Description The graphic equalizer shall be stereo (2 channels). Each channel shall consist of 31 bands centered on standard ISO frequencies at intervals of 1/3 octave and covering a frequency range of 20Hz to 20kHz. Individual bands shall be activated by linear slide faders with a 45mm travel, metal actuator shafts and a tactile center detent. The range of equalization per band shall be either ±6dB or ±15dB selected via a 2-position switch. The equalizer shall have a gain of unity with all sliders centered, and shall have a maximum in/out level of +22dBu. Frequency response shall be ±.25dB 10Hz to20kHz. Hum and noise shall be at least -92dBu and SMPTE intermodulation distortion or THD shall be less than .01% at full output. Input impedance shall be 20k ohm balanced, 10k ohm unbalanced. Output impedance shall be 200 ohm. Inputs and outputs shall be active (transformerless) balanced type on both XLR, 1/4" phone jacks and barrier strip terminals. Individual filters shall be Wein-bridge type and connected in a summing circuit optimized for minimum filter interaction and constant bandwidth at any slider setting. Boost and cut characteristics shall be fully symmetrical, with the filter being electrically removed from the circuit in the center (flat) position. Individual filters shall be accurate to within 3% of indicated center frequency and shall be non-adjustable to insure long term accuracy. The equalizer shall also include an 18dB per octave high pass filter tunable from 8Hz to 200Hz, equipped with a bypass switch. A 2 color bar-graph meter shall be employed to show overall output level and an LED indicator shall show overload conditions. Input gain shall be adjustable over -infinity to +6dB, and an overall EQ bypass switch shall be included. The equalizer shall weigh 13lbs net and mount in a standard 19" rack using 3 spaces (5.25" high). The power requirement shall be 110-115VAC, 50-60Hz, 20W. The unit shall be an Ashly Audio GQX-3102. GQX-3102 Graphic Equalizer Features: • Detented Metal-Shaft Fader • Precision Wein-bridge Filters for Accurate Response and Low Distortion • Constant "Q" Design with Low Ripple and Accurate Response Near the "Flat" Setting • Selectable 15dB or 6dB range • Switchable-Tunable Low-Cut Filter • 10 Position, 2 Color LED Level Meter plus Peak LED Indicators • Balanced XLR, 1/4", and Barrier Strip Inputs • Servo-Balanced XLR, 1/4", and Barrier Strip Outputs • Rider Friendly • 5-Year Worry-Free Warranty

]]> info@djseller.com (Paul Zar (Manager)) http://www.djseller.com/dj-equalizers/ashly/ashly-gqx-3102 Fri, 26 Mar 2010 00:30:13 -0400 635.00 USD 406 10 Ashly 50 GQS-3102 http://www.djseller.com/images/gqx3102-f.jpg http://www.djseller.com/dj-equalizers/ashly/ashly-mqx-2150 http://www.djseller.com/product_reviews/ashly-mqx-2150

Description The graphic equalizer shall be stereo (2 channels). Each channel shall consist of 15 bands centered on standard ISO frequencies at intervals of 2/3 octave and covering a frequency range of 25Hz to 16kHz. Individual bands shall be activated by linear slide faders with a 25mm travel, and a tactile center detent. The range of equalization per band shall be switchable between ±15dB or ±6dB. The equalizer shall have a gain of unity with all sliders centered, and shall have a maximum in/out level of +23dBu. Frequency response shall be ±.25dB 20Hz to 20kHz. Hum and noise shall be at least -96dBu and SMPTE intermodulation distortion or THD shall be less than 0.01% at +20dBu. Input impedance shall be 20k ohm balanced, 10k ohm unbalanced. Output impedance shall be 200 ohm balanced, 100 ohm unbalanced. Inputs and outputs shall be active (tranformerless) balanced type on both XLR and 1/4” phone jacks. Individual filters shall be Wein-bridge type and connected in a summing circuit optimized for minimum filter interaction and constant bandwidth at any slider setting. Boost and cut characteristics shall be fully symmetrical, with the filter being electrically removed from the circuit in the center (flat) position. Individual filters shall be accurate to within 3% of indicated center frequency and shall be non-adjustable to insure long term accuracy. The equalizer shall also include an 18dB per octave high pass filter at 20Hz, internally selectable. A green signal presence and red clip indicators shall show critical operating levels. Input gain shall be adjustable over minus infinity to +6dB, and an overall EQ bypass switch shall be included. The equalizer shall weigh 6.5 lbs net and mount in a standard 19” rack using 1 space (1.75” high). The power requirement shall be 90- 125VAC, 50-60Hz, 10W. The unit shall be an Ashly Audio MQX-2150. MQX-2150 Miniature 15-Band Graphic Equalizer Features: • Constant "Q" design for low ripple and minimum interaction •Precision Wein Bridge Filters •Balanced XLRs & 1/4” TRS Jacks on Inputs and Outputs •Selectable 15dB or 6dB Range •18dB/Octave High Pass Filter •Low Noise Design •Silent In/Out Switching •Signal Present and Clip LEDs •25mm Fader with Center-Off Position •5-Year Worry-Free Warranty

]]> info@djseller.com (Paul Zar (Manager)) http://www.djseller.com/dj-equalizers/ashly/ashly-mqx-2150 Fri, 26 Mar 2010 00:30:13 -0400 240.00 USD 407 10 Ashly 50 GQS-2150 http://www.djseller.com/images/mqx2150-f.jpg http://www.djseller.com/dj-equalizers/ashly/ashly-mqx-2310 http://www.djseller.com/product_reviews/ashly-mqx-2310

Description The graphic equalizer shall be stereo (2 channels). Each channel shall consist of 31 bands centered on standard ISO frequencies at intervals of 1/3 octave and covering a frequency range of 20Hz to 20kHz. Individual bands shall be activated by linear slide faders with a 25mm travel, and a tactile center detent. The range of equalization per band shall be either ±6dB or ±15dB selected via a 2- position switch. The equalizer shall have a gain of unity with all sliders centered, and shall have a maximum in/out level of +23dBu. Frequency response shall be ±.25dB 20Hz to 20kHz. Hum and noise shall be at least -92dBu and SMPTE intermodulation distortion or THD shall be less than .01% at +20dBu. Input impedance shall be 20k ohm balanced, 10k ohm unbalanced. Output impedance shall be 200 ohm balanced, 100 ohm unbalanced. Inputs and outputs shall be active (tranformerless) balanced type on both XLR, 1/4” phone jacks and barrier strip terminals. Individual filters shall be Weinbridge type and connected in a summing circuit optimized for minimum filter interaction and constant bandwidth at any slider setting. Boost and cut characteristics shall be fully symmetrical, with the filter being electrically removed from the circuit in the center (flat) position. Individual filters shall be accurate to within 3% of indicated center frequency and shall be non-adjustable to insure long term accuracy. The equalizer shall also include an 18dB per octave high pass filter at 40Hz, equipped with a bypass switch. Green signal presence and red clip indicators shall show critical operating levels. Input gain shall be adjustable over -infinity to +6dB, and an overall EQ bypass switch shall be included. The equalizer shall weigh 8.5 lbs net and mount in a standard 19” rack using 2 spaces (3.5” high). The power requirement shall be 94-125VAC, 50-60Hz, 13W. The unit shall be an Ashly Audio MQX-2310. MQX-2310 Miniature 31-Band Graphic Equalizer Features: • Constant "Q" design for low ripple and minimum interaction •Precision Wein Bridge Filters •Balanced XLR, 1/4” TRS & Barrier Strip Screw Terminals on Inputs and Outputs •Selectable 15dB or 6dB Range •Switchable 18dB/Octave High Pass Filter •Low Noise Design •Silent In/Out Switching •Signal Present and Clip LEDs •25mm Fader with Center-Off Position •5-Year Worry-Free Warranty

]]> info@djseller.com (Paul Zar (Manager)) http://www.djseller.com/dj-equalizers/ashly/ashly-mqx-2310 Fri, 26 Mar 2010 00:30:13 -0400 480.00 USD 408 10 Ashly 50 MQX-2310 http://www.djseller.com/images/mqx2310-f.jpg