Description

The unit shall be a stereo three-way 24dB per octave electronic crossover
in a two rack space metal chassis. This same unit shall also be configurable
as a four-channel two-way electronic crossover. The unit shall have separate
front panel input level controls on all channels for interfacing with
broad range of nominal system levels. Unity gain operation must be
achievable by setting these controls at the “U” position. Each of the unit’s
channels shall have independent, infinitely variable adjustment of
crossover frequency with controls located on the front panel. This control
shall provide a total range of 200:1 when used in conjunction with the
unit’s adjacent RANGE switch. There shall be a RESPONSE control calibrated
in decibels on each channel to adjust the dampng of that filter at
the crossover point, thus allowing variable system response adjustment to
specific site requirements. The unit shall have separate clip indicators to
monitor all internal amplifiers for any possible overload conditions. Each
channel of the crossover unit shall have a separate output level control
and mute switch located on the front panel. There shall be separate inputs
and outputs for each channel on 1/4” TRS phone jacks and XLR connectors,
any of which may be used balanced or unbalanced. In addition, there
shall also be an independent mono summed output labeled MONO LOW
OUT (on a separate 1/4” TRS jack and an XLR jack). The crossover must
be made in America and covered under a limited full Five Year warranty.
The shipping weight shall be ten pounds, with an overall depth of six
inches. The crossover shall be the Ashly model XR-2001, manufactured by
Ashly Audio Inc. of Rochester, New York. No other unit shall be acceptable
unless data submitted from an independent test laboratory verifies
that the above specifications are fully met or exceeded.

S
XR-2001 Stereo 3-Way/Mono 4/5-Way Crossover
Features:
•5-Year Worry-Free Warranty
• 24dB Per Octave Slopes
• Variable Filter Response Allows
Tuning-In Linkwitz-Riley or
Other Filter Performances
• Output Mute Switches
• XLR and 1/4” Inputs and
Outputs
• 20Hz Third Order Hi-Pass Filter
• Extra Wide Tuning Range
• Peak Overload Warning Lights
• Tamper-Proof Security Covers
Optionally Available

Description

The unit shall be a stereo two-way, switchable to mono 3-way, 24dB
per octave electronic crossover in a one rack space metal chassis.
The unit shall have separate front panel input level controls on
both channels for interfacing with broad range of nominal system
levels. Unity gain operation must be achievable by setting these
controls at the “U” position. Each of the unit’s two channels shall
have independent, infinitely variable adjustment of crossover frequency
with controls located on the front panel. This control shall
provide a total range of 200:1 when used in conjunction with the
unit’s adjacent recessed RANGE switch. There shall be a
RESPONSE control calibrated in decibels on each channel to
adjust the damping of that filter at the crossover point, thus allowing
variable system response adjustment to specific site requirements.
The unit shall have separate clip indicators to monitor all
internal amplifiers for any possible overload conditions. Each
channel of the crossover unit shall have a separate output level
control and mute switch located on the front panel. The crossover
shall be the Ashly model XR-1001. There shall be separate inputs
and outputs for each channel on 1/4” TRS phone jacks and XLR
connectors, any of which may be used balanced or unbalanced.
There shall be a 1/4" TRS connector providing for a summed
mono low output. which can be used balanced or unbalanced. The
crossover must be made in America and covered under a limited
full Five Year warranty. The shipping weight shall be eight
pounds, with an overall depth of six inches. The unit must be
manufactured by Ashly Audio Inc. of Rochester, New York. No
other unit shall be acceptable unless data submitted from an independent
test laboratory verifies that the above specifications are
fully met or exceeded.


XR-1001 Stereo 2-Way/Mono 3-Way Crossover
Features:
•5-Year Worry-Free Warranty
• 24dB Per Octave Slopes
• Variable Filter Response Allows
Tuning-In Linkwitz-Riley or Other
Filter Performances
• Summed Mono Output
• Output Mute Switches
• XLR and 1/4” Inputs and Outputs
• 20Hz Third Order Hi-Pass Filter
• Extra Wide Tuning Range
• Peak Overload Warning Lights
• Tamper-Proof Security Covers
Optionally Available