DJ Seller : RSS Products Feed :: Samson

Samson SZ1360

info@djseller.com (Paul Zar (Manager)) — Fri, 13 May 2011 10:55:53 -0400

The Samson SZ Series amplifiers have been designed to provide robust, clean output with low distortion and wide dynamic range, along with the dependability demanded by the most professional design engineers and audio installers. The SZ1120 is a single channel amplifier that provides 120 watts of clean power at 4 ohms thanks to its internal, high performance matching transformers, making it an ideal solution for constant voltage systems. The SZ amplifiers are enclosed in a convenient two-rackspace chassis and feature a reliable linear amplifier design. Rear panel controls include input level adjust from �12 to 0 dB and a high pass filter at 400Hz to use with announcement horn speakers. Front panel signal, peak and protection LED indicators help you set the correct operating levels while standard XLR input and link connectors, plus Euroblock speaker output connectors are provided to ensure easy connections and maximum flexibility. To keep the SZ1120 running cool, its design employs internal wind tunnels with forced-air cooling via an internal fan, greatly reducing the chance of overheating and other thermal problems. Multi-stage protection for power-up, overheating, over-current, short circuit, low output impedance and DC voltage assures high reliability under the most demanding situations. The SZ series amplifiers are road tough with their all steel chassis, 19-inch rackmount design and convenient carry handles facilitating easy installation in any rack. Optimized for commercial installations including schools, houses of worship, office buildings and live sound venues, the SZ series amplifiers will deliver clean, reliable power. Features:

Delivers 360 watts of power @ 4 ohms
Built-in 70/100 volt output transformers with flat frequency response from 70Hz to 18kHz
Rear panel level control for adjustments from �12 to 0 dB
Audio specifications: 0.04% THD, dynamic range of 105 dB and crosstalk of 80 dB
LED signal indicators display power output levels
Forced air cooling via internal fan
Protection circuitry with dedicated LEDs
Input connection made using standard male XLR connector to accommodate balanced signal sources
Output connections made using Euroblock connectors which accept 12 gauge wire
Fits into any standard 19-inch rack
Rugged all-steel chassis with sleek black finish

Samson ZM125

info@djseller.com (Paul Zar (Manager)) — Fri, 13 May 2011 10:54:41 -0400

ZM125 - Zone Mixer / Amplifier
The ZM series mixers provide an ideal solution for small to medium-size commercial sound system installations. The ZM125 features a built-in constant voltage power amplifier capable of providing 125 watts of clean power. Six input channels with individual level controls are provided, so connecting sound sources is simple thanks to the available XLR, 1/4-inch and RCA connectors. Additionally, the ZM125 features five selectable speaker zone outputs. The ZM125 is ideal for distributing music and announcements throughout different rooms and the dedicated paging microphone input allows you to setup a distant paging station (for a hostess in a restaurant, for example). There's even an on-board chime, with four selectable tones, to alert the listeners of an upcoming page. For businesses that want to improve their customers' telephone experience, a MOH (Music On Hold) facility is also included. When interfaced with a business telecom system, music or valuable pre-recorded announcements are heard while customers are on hold. To control the overall tonal response of the sound system, the ZM series employs a seven-band graphic equalizer. A master level control and five segment level meters allow you to set a clean signal at the correct volume. For added flexibility you can add the optional Samson TCM-3 sound module with FM tuner and CD player that can play both standard CDs and CDs with MP3s. The ZM125 can be table-top or mounted in a standard 19-inch equipment rack using the included rackmount ears. The sleek black finish matches just about any d�cor, plus the steel chassis adds to its durability and reliability. Perfect for schools, restaurants, office buildings, small factories, or just about any place high quality, distributed audio is needed, the ZM125 offers excellent sound and great value. Features:

125 watts of clean power
Six mic/line inputs on 1/4-inch, XLR and RCA connectors
Built-in 7-band graphic equalizer
Three layer priority muting system
Remote microphone connection on a Euroblock terminal
Built-in announcement chime with four selectable tones
M.O.H. (Music On Hold) input and output
Telephone paging input on a Euroblock terminal
Phantom power on mic channels 1 and 2 for connecting condenser microphones
Advanced amplifier protection including current limiting, over current and thermal protection
Link and preamp terminals allow for expansion to an external mixer or power amplifier
Advanced electric circuit design with high quality op-amps
Easily configured for table-top or standard 19-inch rackmount installations
Expansion bay for adding optional Samson TCM-3 music source module

Samson SX-3200

info@djseller.com (Paul Zar (Manager)) — Fri, 13 May 2011 10:53:40 -0400

The SX3200 is the newest and most powerful addition in the SX series of amplifiers. Boasting a staggering 3200 Watts of Class H power in a two rack space design. The SX3200 is a perfect solution for driving professional audio systems of any size.

The SX Amps are built around a new power core design with over-sized toroidal transformers and extra-large heat sinks. The amps maintain cool operating temperatures thanks to an innovative forced-air cooling system with temperature sensitive variable-speed fans. Trouble free operation is provided by multi-stage protection for power-up, over-heating, over-current, short circuit, low output impedance and DC voltage, assuring total reliability under the most demanding conditions. The entire SX line features locking XLR/TRS inputs, Speakon� and 5-way binding post speaker outputs.

FEATURES

Professional High Power, Class H, Rail-switching Amplifier
750 Watts per side @ 8 Ohms
1100 Watts per side @ 4 Ohms
Dual Variable-speed Fan Cooling
Signal, Peak, and Protection Circuit Indicators
5-way Binding Post and Speakon� Speaker Outputs
XLR and TRS Input Connections
Dual Rack Space Design

Samson SERVO

info@djseller.com (Paul Zar (Manager)) — Fri, 13 May 2011 10:52:40 -0400

The Servo 300 is a great choice for powering a small to medium sized PA, or an intergrated conference room audio system.

The Servo 300 features large 10-segment 3-color level LED meters and independent channel volume controls. The rear panel includes 1/4-inch balanced and RCA input connectors, as well as 5-way binding post and 1/4-inch speaker outputs.

The Servo amp line also features a 4-stage power protection circuitry that ensures optimal performance and protection of connected components.

Features:

150 watts per side at 4 ohms
300 watts bridged mono at 8 ohms
1/4-inch and RCA input connectors
5-way binding post and 1/4-inch outputs
Dual Rack space design
10-segment, 3-color Level LED meters
4-stage power protection circuitry

Samson SZ1120 Amplifier

info@djseller.com (Paul Zar (Manager)) — Fri, 13 May 2011 08:18:33 -0400

Description:

The Samson SZ Series amplifiers have been designed to provide robust, clean output with low distortion and wide dynamic range, along with the dependability demanded by the most professional design engineers and audio installers. The SZ1120 is a single channel amplifier that provides 120 watts of clean power at 4 ohms thanks to its internal, high performance matching transformers, making it an ideal solution for constant voltage systems. The SZ amplifiers are enclosed in a convenient two-rackspace chassis and feature a reliable linear amplifier design. Rear panel controls include input level adjust from �12 to 0 dB and a high pass filter at 400Hz to use with announcement horn speakers. Front panel signal, peak and protection LED indicators help you set the correct operating levels while standard XLR input and link connectors, plus Euroblock speaker output connectors are provided to ensure easy connections and maximum flexibility. To keep the SZ1120 running cool, its design employs internal wind tunnels with forced-air cooling via an internal fan, greatly reducing the chance of overheating and other thermal problems. Multi-stage protection for power-up, overheating, over-current, short circuit, low output impedance and DC voltage assures high reliability under the most demanding situations. The SZ series amplifiers are road tough with their all steel chassis, 19-inch rackmount design and convenient carry handles facilitating easy installation in any rack. Optimized for commercial installations including schools, houses of worship, office buildings and live sound venues, the SZ series amplifiers will deliver clean, reliable power. Features:

Delivers 120 watts of power @ 4 ohms
Built-in 70/100 volt output transformers with flat frequency response from 70Hz to 18kHz
Rear panel level control for adjustments from �12 to 0 dB
Audio specifications: 0.04% THD, dynamic range of 105 dB and crosstalk of 80 dB
LED signal indicators display power output levels
Forced air cooling via internal fan
Protection circuitry with dedicated LEDs
Input connection made using standard male XLR connector to accommodate balanced signal sources
Output connections made using Euroblock connectors which accept 12 gauge wire
Fits into any standard 19-inch rack
Rugged all-steel chassis with sleek black finish

Samson SZ1240

info@djseller.com (Paul Zar (Manager)) — Fri, 13 May 2011 08:13:23 -0400

Samson SZ1240 - Zone Amplifier
The Samson SZ Series amplifiers have been designed to provide robust, clean output with low distortion and wide dynamic range, along with the dependability demanded by the most professional design engineers and audio installers. The SZ1120 is a single channel amplifier that provides 120 watts of clean power at 4 ohms thanks to its internal, high performance matching transformers, making it an ideal solution for constant voltage systems. The SZ amplifiers are enclosed in a convenient two-rackspace chassis and feature a reliable linear amplifier design. Rear panel controls include input level adjust from �12 to 0 dB and a high pass filter at 400Hz to use with announcement horn speakers. Front panel signal, peak and protection LED indicators help you set the correct operating levels while standard XLR input and link connectors, plus Euroblock speaker output connectors are provided to ensure easy connections and maximum flexibility. To keep the SZ1120 running cool, its design employs internal wind tunnels with forced-air cooling via an internal fan, greatly reducing the chance of overheating and other thermal problems. Multi-stage protection for power-up, overheating, over-current, short circuit, low output impedance and DC voltage assures high reliability under the most demanding situations. The SZ series amplifiers are road tough with their all steel chassis, 19-inch rackmount design and convenient carry handles facilitating easy installation in any rack. Optimized for commercial installations including schools, houses of worship, office buildings and live sound venues, the SZ series amplifiers will deliver clean, reliable power. Features:

Delivers 240 watts of power @ 4 ohms
Built-in 70/100 volt output transformers with flat frequency response from 70Hz to 18kHz
Rear panel level control for adjustments from �12 to 0 dB
Audio specifications: 0.04% THD, dynamic range of 105 dB and crosstalk of 80 dB
LED signal indicators display power output levels
Forced air cooling via internal fan
Protection circuitry with dedicated LEDs
Input connection made using standard male XLR connector to accommodate balanced signal sources
Output connections made using Euroblock connectors which accept 12 gauge wire
Fits into any standard 19-inch rack
Rugged all-steel chassis with sleek black finish

SAMSON SX1200

info@djseller.com (Paul Zar (Manager)) — Fri, 26 Mar 2010 00:30:11 -0400

Description

The SX-1200 is an efficient class AB amplifier that offers ease of operation and plenty of available power to effectively drive a moderate sized PA, monitor fills, or fixed installation system. Stereo operation is available down to 2 Ohms at 600-Watts per side, as well as a 4 Ohm bridged mono mode providing the full 1200 Watts of power.

Features:

# Professional Class AB Power Amplifier
# 300 Watts per side @ 8 Ohms
# 450 Watts per side @ 4 Ohms
# 600 Watts per side @ 2 Ohms
# 1200 Watts bridged mono @ 4 Ohms
# Dual Variable-speed Fan Cooling System
# Signal, Peak, and Protection Circuit Indicators
# 5-way Binding Post and Speakon Speaker Outputs
# XLR and TRS Input Connections
# Dual Rack Space Design

SAMSON SX1800

info@djseller.com (Paul Zar (Manager)) — Fri, 26 Mar 2010 00:30:11 -0400

Description

The SX-1800 produces 1800 Watts of power from a class AB amplifier design. Stable at 2 Ohms like the entire SX line, the SX-1800 lets you run a system at a blistering 900-Watts per-side in stereo mode with out breaking a sweat, thanks to the internal amplifier design and variable-speed fan cooling.

Features:

# Professional Class AB Power Amplifier
# 400 Watts per side @ 8 Ohms
# 600 Watts per side @ 4 Ohms
# 900 Watts per side @ 2 Ohms
# 1800 Watts bridged mono @ 4 Ohms
# Dual Variable-speed Fan Cooling System
# Signal, Peak, and Protection Circuit Indicators
# 5-way Binding Post and Speakon Speaker Outputs
# XLR and TRS Input connections
# Dual Rack Space Design

SAMSON SX2400

info@djseller.com (Paul Zar (Manager)) — Fri, 26 Mar 2010 00:30:11 -0400

Description

The SX-2400 utilizes a high output rail-switching amplifier design allowing 1200 Watts per side or 2400 Watts bridged mono at 4 Ohms. This kind of power is perfect for large multi-format full-range and subwoofer systems. With locking XLR inputs and Speakon� speaker outputs your connections are secure, solid, and worry free.

Features:

# Professional High Power Rail-switching Amplifier
# 550 Watts per side @ 8 Ohms
# 750 Watts per side @ 4 Ohms
# 1200 Watts per side @ 2 Ohms
# 2400 Watts bridged mono @ 4 Ohms
# Dual Variable-speed Fan Cooling System
# Signal, Peak, and Protection Circuit Indicators
# 5-way Binding Post and Speakon Speaker Outputs
# XLR and TRS Input Connections
# Dual Rack Space Design

SAMSON SX2800

info@djseller.com (Paul Zar (Manager)) — Fri, 26 Mar 2010 00:30:11 -0400

Description

The most powerful SX Amplifier in the lineup, the SX-2800 boasts an incredible 2800 Watts or power in a two rack space design. Ideal for driving 18-inch sub fills or large front-of-house mains in larger venues, the SX-2800 gives you clean worry free power, and a lot of it.

Features:

# Professional High Power Rail-switching Amplifier
# 700 Watts per side @ 8 Ohms
# 900 Watts per side @ 4 Ohms
# 1400 Watts per side @ 2 Ohms
# 2800 Watts bridged mono @ 4 Ohms
# Dual Variable-speed Fan Cooling
# Signal, Peak, and Protection Circuit Indicators
# 5-way Binding Post and Speakon� Speaker Outputs
# XLR and TRS Input Connections
# Dual Rack Space Design